General Iron Worker

IRON WORKER PROCEDURE

SELECT CORRECT MATERIAL TO BE CUT

MEASURE PIECE TO LENGTH AND DRAW CUT LINE WITH SQUARE OR SET STOP TO CORRECT LENGTH

AFTER CUT MARK EACH PIECE CLEARLY WITH PART AND JOB NUMBER

MARK ANY DROP WITH DIMENSIONS AND PLACE INTO DROP AREA

AFTER CORRECT QUANTITY OF MATERIAL IS CUT WRITE "CUT" ON END PLATE PAGE

6. LAY OUT MATERIAL FOR PUNCHING, USING END PLATE PAGE

7. PUNCH PARTS USING CORRECT SIZE PUNCH AND DIE

8. AFTER ALL PARTS ARE PUNCHED CROSS OFF ON END PLATE PAGE

9. HAVE ALL PARTS INSPECTED BY INSPECTOR PRIOR TO MOVING TO PARTS STAGING AREA